The GRIP floor modules are fastened to the base by means of expansion guides.
Install the expansion guides under the GRIP floor modules in the place where they are to be fastened.
Under the module
The drawing shows where the holes of the module fit the holes of the expansion guides.
A hole is drilled through the expansion guide into the base.
The supplied screws are inserted with a rubber hammer and subsequently tightened.
To start with, only one side of the expansion guide is fastened. Afterwards a hole for the other side is drilled into the base.
The remaining screw is inserted with a rubber hammer and tightened.
Ready for use
The GRIP floor is now secured and cannot slide, while it can still be lifted up for cleaning underneath.
Maintenance and substitution
One square metre of Excellent Systems GRIP surface has the advantage of consisting of 16 individual tiles. Therefore,
you do NOT have to replace the complete floor, but only any individual tiles that are worn or broken.
For the GRIP flooring tiles, slip resistance of the tile in demanding environments is an essential issue. Maintenance should therefore be included in purchase calculations from the very beginning, so that safety is maintained over time. A safety maintenance plan is thus recommended to accompany each installation.